Custom Signs in Bremerton: Designed, Built, and Installed from Our Tacoma Shop

Channel letters, monument signs, wayfinding, and branch signage for Bremerton businesses. We handle the design, the City of Bremerton permit, the build, and the install.

Start Your Project →

Call (253) 473-3323 or email info@plumbsigns.com

Plumb Signs is a UL-listed sign fabricator in Tacoma, WA. We have built signs since 1986 and we build every sign in our own shop. Bremerton is home to Naval Base Kitsap-Bremerton, a busy downtown, and commercial corridors like Kitsap Way and Wheaton Way. We design, permit, build, and install signs for businesses across all of it. We have worked in the city before: our Kitsap Bank rebrand included Bremerton and East Bremerton branches.

Recent Bremerton Projects

Wheaton Way Veterinary Hospital building sign with teal logo and channel letters on a gray raceway, Wheaton Way, Bremerton, WA, by Plumb Signs

Wheaton Way Veterinary Hospital + Urgent Care, Bremerton

Installed July 2025 on State Highway 303 (Wheaton Way). We handled the site survey and the permit, then built and installed a wall sign and a monument.

  • Wall sign: a 71-inch remote channel logo and channel letters reading "Wheaton Way Veterinary Hospital" and "+ Urgent Care," on an oversized raceway painted to match AEP Span Old Town Gray. The old sign was removed.
  • Monument: a 10 ft by 10 ft double-faced aluminum cabinet with push-through logo and copy, lit with white LEDs, on a new aluminum base cover.
  • Interior: a 33-inch acrylic logo in the lobby, painted white on the edges with a teal vinyl face, installed in June 2025.
Close-up of Wheaton Way Veterinary Hospital + Urgent Care illuminated channel letters and logo in Bremerton, WA Wheaton Way Veterinary Hospital double-faced aluminum monument sign on State Highway 303 in Bremerton, WATeal paw-print cross logo sign mounted on the lobby wall at Wheaton Way Veterinary Hospital in Bremerton, WA, fabricated by Plumb Signs
Blue MultiCare channel letters and logo above red EMERGENCY channel letters on the MultiCare Bremerton emergency department, installed by Plumb Signs on State Highway 303

MultiCare Bremerton Emergency, State Highway 303

Installed spring 2025 at 5900 State Highway 303 NE. We handled the site survey, then built and installed the exterior signs, plus interior signs in a follow-up phase.

  • Wall signs: raceway-mounted trimcapless channel letters and logo reading "MultiCare" and "EMERGENCY," and "Ambulance" letters over the ambulance entrance.
  • EMERGENCY display: a face- and halo-lit EMERGENCY channel letter and logo set on an oversized raceway.
  • Monuments: two freestanding monument signs: a 9 ft 9 in by 8 ft 9 in double-face internally illuminated monument, and a 60 by 57.5 inch single-face non-illuminated monument.
  • Address numbers: 14-inch flat cut-out aluminum address numbers reading "5900," spaced off the wall.
  • Interior: painted acrylic letters, restroom and regulatory signs, room ID signs, and window decals, installed in a second phase.
MultiCare Bremerton emergency entrance with MultiCare and EMERGENCY channel letters on the wall above a covered canopyAmbulance channel letters on the canopy at the MultiCare Bremerton ambulance entranceBlue MultiCare monument sign with red directional band beside State Highway 303 at the Bremerton emergency departmentSecond MultiCare monument sign at the Bremerton emergency department, shown with its blue top and red arrow band
Round blade sign with the YMCA logo mounted on the Marina Square building in downtown Bremerton, fabricated by Plumb Signs

YMCA Marina Square, Downtown Bremerton

Installed fall 2024 at 280 Washington Ave on the Bremerton waterfront. We handled the site survey, fabrication and installation.

  • Blade sign: a 38-inch round, 6-inch deep aluminum blade sign with two sets of 3/8-inch acrylic logo, plate-mounted to the exterior wall with two brackets.
  • Window graphics: a 60 by 72 inch white perforated window graphic and three sets of white window vinyl, installed on the glass.
  • Also supplied: a printed banner for the railing and two A-boards.
YMCA blade sign on the corner of the Marina Square building in downtown BremertonYMCA logo window graphic on the glass at Marina Square, Bremerton

Peninsula Work You Can Look At

Real Plumb Signs projects on the Kitsap Peninsula.

Kitsap Bank, a Division of Heritage Bank

Branch signs converted across the Kitsap and Olympic Peninsulas in 2026. Bremerton branches named on the case study: East Bremerton, 6th & Warren, and 6th & Pacific.

St. Michael Medical Center, Silverdale

Healthcare signage and wayfinding in Silverdale, minutes from Bremerton.

Signs on the Kitsap Peninsula

Our overview of peninsula work, from Port Orchard to Poulsbo.

What We Build for Bremerton Businesses

Channel Letters

Illuminated and non-illuminated letters for storefronts and office buildings.

Monument and Pylon Signs

Freestanding signs for sites along arterials like Kitsap Way and Wheaton Way.

Wayfinding

Directional and site-wide signage for campuses and multi-tenant properties.

Branch and Multi-Site Programs

Consistent signs across many locations, with permits filed in each city.

Service and LED Retrofits

Repairs, relamping, and updates to existing signs.

Design and Permitting

Drawings that meet the City of Bremerton application requirements.

Bremerton Sign Permits: What to Expect

  • Who issues it: the City of Bremerton Department of Community Development, applied for online through the City portal.
  • When you need one: a permit is required before a sign is placed, erected, or displayed, unless it is exempt under BMC 20.52.040 (BMC 20.52.030).
  • What goes in the application: owner or agent signature, a scaled site plan covering 50 feet around the sign, elevation drawings with illumination and supports, and a landscaping plan.
  • Lighting: shielded, and no more than 0.3 footcandles above ambient light (BMC 20.52.090).
  • Downtown and centers: moving, flashing, or animated signs are prohibited (BMC 20.52.140).
  • Small changes: the Director can approve minor adjustments up to 10 percent for site hardship (BMC 20.52.150).

City rules change and each zone differs. We confirm the current requirements for your address before we draw anything. Source: BMC Chapter 20.52 and the City of Bremerton Community Development page.

Where We Work Around Bremerton

Downtown Bremerton and the waterfront, Charleston, Manette, East and West Bremerton, the Wheaton Way and Kitsap Way corridors, Gorst, and Navy Yard City. Nearby we serve Silverdale, Port Orchard, Poulsbo, Bainbridge Island, and the rest of Kitsap County.

Our shop is at 909 S 28th St in Tacoma. Every Bremerton sign is built there, then installed by our crew on site.

Bremerton Signage FAQs

Who makes channel letters in Bremerton?

Plumb Signs designs, builds, permits, and installs channel letters for Bremerton businesses from our Tacoma shop. In Bremerton we built a 71-inch remote channel logo with channel letters for Wheaton Way Veterinary Hospital on State Highway 303, and the raceway-mounted MultiCare and EMERGENCY channel letters at MultiCare Bremerton.

What Bremerton sign projects has Plumb Signs completed?

Recent Bremerton projects include Wheaton Way Veterinary Hospital + Urgent Care, MultiCare Bremerton on State Highway 303, and YMCA Marina Square downtown. Our Kitsap Bank rebrand also covered the East Bremerton, 6th & Warren, and 6th & Pacific branches.

How long does a Bremerton sign project take?

It depends on the sign and on the permit. The City of Bremerton's Community Development department says it cannot give a definite time frame for permit issuance and reviews plans in the order they are received. Send us your address and what you have in mind, and we will tell you what the schedule depends on.

Does Plumb Signs install signs in Bremerton?

Yes. We design, build, permit, and install commercial signs for Bremerton businesses from our Tacoma shop. We have also worked in Bremerton before: our Kitsap Bank rebrand covered branches in Bremerton and East Bremerton.

Do I need a permit for a business sign in Bremerton?

In most cases, yes. Bremerton Municipal Code 20.52.030 says no sign may be placed, erected, or displayed without a sign permit unless it is exempt under 20.52.040. Exempt items include small incidental signs and signs inside buildings. Ask us before you assume your sign is exempt.

Who issues sign permits in Bremerton?

The City of Bremerton Department of Community Development (DCD). Sign permits are applied for online through the City of Bremerton portal. The Permit Center is at 345 6th St. and can be reached at 360-473-5275.

What does a Bremerton sign permit application include?

Under BMC 20.52.030(c): the property owner's or designated agent's signature, a scaled site plan showing buildings, streets, signs, and utility poles within 50 feet of the sign, elevation drawings with dimensions, height, illumination method, and structure supports, and a landscaping plan. We prepare these drawings as part of the project.

Are there lighting limits for signs in Bremerton?

Yes. Sign lighting must be shielded or directed to avoid undue brightness and glare, and the code defines undue brightness as more than 0.3 footcandles above ambient light (BMC 20.52.090). Moving, flashing, or animated signs are prohibited in downtown and center zones (BMC 20.52.140).

Which Bremerton and nearby areas do you serve?

Downtown Bremerton, Charleston, Manette, East and West Bremerton, Wheaton Way, Kitsap Way, and Gorst, plus Silverdale, Port Orchard, Poulsbo, Bainbridge Island, and the rest of the Kitsap Peninsula.

Planning a Sign Project in Bremerton?

Send us the address and what you have in mind. We will tell you what the City requires.

Start Your Project →

Call (253) 473-3323 or email info@plumbsigns.com

Plumb Signs · 909 S 28th St, Tacoma, WA 98409