TRA Gig Harbor WA
Plumb Signs · Real-World Signage · Gig Harbor, WA
Three signs, one arrival sequence.
An exterior wordmark cabinet and two halo-lit aluminum diamonds — designed, built, and installed by Plumb Signs for TRA Medical Imaging at 4700 Point Fosdick Dr NW in Gig Harbor.
Project Overview
Plumb Signs partnered with TRA Medical Imaging on a three-sign brand program for their Gig Harbor location at 4700 Point Fosdick Dr NW, Suite G. The signs follow the visitor in: a wordmark cabinet on the building exterior, a halo-lit diamond identifying the suite on the building’s lobby wall, and a second halo-lit diamond anchoring the reception wall behind the front desk.
The exterior cabinet — “TRA MEDICAL IMAGING” set in a clean horizontal lockup — sits on the curtainwall-and-tile facade and gives patients the visual cue from the parking lot. Inside, the two halo-lit diamonds carry the brand the rest of the way: a quiet, premium effect with the aluminum silhouette floating off the wall and a soft white-LED halo wrapping the edges. The reception piece measures 4′ wide × 3′10″ tall on a 1½″ wall stand-off.
Healthcare and medical-imaging environments earn first-impression work that signals confidence. Patients arriving for diagnostic imaging want to know they’re in the right place and that the operation behind the door takes details seriously. Three coordinated signs handle that arrival sequence — one outside, one in the lobby, one at reception — all designed, fabricated, and installed in the same project. Built in our Tacoma shop, twelve miles east across the Tacoma Narrows Bridge from the install site.
Project Snapshot
At a Glance
Gig Harbor, WA 98335
1½″ wall stand-off
Four Views · One Arrival Sequence
How the Brand Meets the Patient
Patients meet the brand four times on the way to their appointment: at the building from the parking lot, walking up to the suite door, identifying the office from the lobby, and again at the reception desk inside. Each sign was designed, fabricated, and installed by Plumb Signs as one coordinated program — and the approach view shows how the halo reads at lobby distance, not just up close.
Fabrication & Illumination
How the Halo Is Built
Halo-lit (reverse-lit) construction: an opaque aluminum face floats off the wall so the LED light source is hidden behind the sign and projects a soft halo of light onto the wall around the silhouette. Sharp by day, glowing by night.
- Sign body: CNC-cut fabricated aluminum diamond, returns welded and finished
- Dimensions: 4′-0″ wide × 3′-10″ tall
- Construction: Reverse-lit (halo) with concealed LED module bank on the rear
- Stand-off: 1½″ wall stand-off for clean LED halo dispersion
- Listing: UL-listed sign assembly
- Illumination: Energy-efficient white LED modules, even spread across the back face
- Power: Low-voltage, low-heat — long service life, low operating cost
- Finish: Automotive-grade paint, matte/satin on the face for glare control
- Mounting: Stud-mount to wall structure with concealed hardware — no through-face fasteners
- Service access: Rear-access LED bank for driver/module replacement without removing the sign face
Built to Plumb Signs’ standard for interior reception and brand-ID signs: clean welds, knife-edge returns, paint-grade finish on the face, and a service-friendly LED layout so a single failed module never means pulling the sign down.
Our Process
How the Project Came Together
Four phases — brand to install — one shop.
Brand Alignment
Reproduced the TRA diamond at scale — arrow geometry and internal counter shapes mapped so the lit halo reads cleanly without filling in.
Shop Drawings & CAD
In-house design produced dimensioned face profile, return depth, LED layout, mounting-stud pattern, and wall-anchor schedule sized to the reception wall.
Fabrication in Tacoma
CNC cut, welded, finished, and LED-engineered in our 909 S 28th St shop. Face, returns, and LED panel staged together before crating for the Narrows run.
Install at Gig Harbor
Licensed installer ran the site survey, set the stud pattern off centerline, anchored with concealed hardware, dressed the feed, and commissioned the LED bank in a single visit.
Why Halo-Lit
A Premium Effect Without Shouting
Halo lighting — also called reverse-channel or backlit — sits between the loudness of a face-lit channel letter and the quiet of a flat dimensional logo. Light comes from behind the sign, the silhouette stays sharp and opaque, and a soft glow rings the edges. The result reads premium in any lighting condition: confident at midday, atmospheric in low light, never harsh.
For reception walls, lobby ID, and donor-recognition installs, halo-lit construction holds up across a few useful axes: the face is paintable and brand-accurate; the LED hardware lives behind the wall plane so nothing competes with the logo geometry; the lit effect photographs well; and the energy load is low enough to run on through business hours without a noticeable utility line item. It is the construction Plumb Signs reaches for first when a client wants their brand to arrive in the room without shouting.
Service Area
Interior Signage in Gig Harbor & the Kitsap Peninsula
Plumb Signs is based in Tacoma — twelve miles east across the Tacoma Narrows Bridge from this office. That short hop means site survey, install, and any future service call happen without travel-day overhead. The same crew that builds the sign drives it over the bridge to set it.
We design, fabricate, and install commercial signage — exterior monuments, channel letters, illuminated cabinets, wayfinding, ADA-tactile, interior reception and lobby ID, halo-lit logos, and dimensional letter walls — across Gig Harbor and the wider Kitsap Peninsula: Gig Harbor, Bremerton, Port Orchard, Silverdale, Poulsbo, Bainbridge Island, Kingston, and Belfair.
Frequently Asked
About Halo-Lit Logos and This Project
What is a halo-lit (reverse-lit) logo sign?
What did the TRA Medical Imaging signage project include?
Does Plumb Signs install interior signage in Gig Harbor, WA?
How long does a halo-lit logo sign take to design, fabricate, and install?
Are halo-lit signs UL-listed?
Is halo lighting energy-efficient?
What other interior sign types does Plumb Signs build?
Ready to Elevate Your Interior Branding?
From halo-lit logos to full environmental branding programs, Plumb Signs designs, fabricates, and installs custom interior signage that brings your brand to life — beautifully, professionally, and on schedule.
